(0.5-3)x1250mm Simple Hydraulic Slitting Line Slitting Speed
1. Technical Parameter
|Material||GI or HRS|
|Coil plate width||1250mm|
|Slitting length tolerance||±1. 5mm|
|decoiler loading capacity||8 Tons|
|Coil Inside diameter||508mm|
|Coil Outside diameter||1400mm|
|Cutting blade material||40Cr|
|Control system||PLC Panasonic|
2. Composed Device
2.1 Hydraulic de-coiler
- Supporting steel rolls and uncoiling
- Hydraulic pressure drives the level and landscape orientation
- It is designed without motor on uncoiler.
2.2 Hydraulic pinch and press device
2.3 Slitting Machine
- Drive system consists of drive stand, 500 decelerator, 55KW
frequency conversion control motor, the gear distribution box,
coupler, connection shafts and cover.
- Main section is made up of base, fixed brackets, large slide block
2 blade pivot, movable brackets, slide block, the adjustment device
of front and back of the brackets and the lifting device of blade
pivot, supporting blades, isolating cover and rubber ring, etc.
- The main section adopts hydraulically move out the brackets which
is very convenient to change the blades
- And the 0.25Kw motor drives the up-knife pivot to lift up and down
to adjust the clearance according to the steel thickness.
2.4 Scrap Winder
It consists of base, the shaft and plate of edge material, friction
wheel, supporting wheel chain, chain, 350 decelerator and 4Kw
- Double head design makes it safe to operate.
2.5 Transition Table
- This table should be prepared by the customer
2.6 Tension Stand
- consist of base, pre-dividing shaft, bracket, press shaft,
hydraulic damp device and hydraulic shaft lifting the press down
- At the exit part, it is designed the lifting table to feed the
slitted steel strips right into the recoiler which will make it
easy to operate.
2.7. Hydraulic Recoiler
onsist of base, bearing frame, recoiler shaft, the expansion device
of hydraulic recoiling, the expanded recoiling plate, movable arm
bearing, supporting 650 decelerator, 55KW frequency conversion
- The press arm is fixed on the recoiler to wind each coils one by
one and ensure the recoiling quality.
2.8 Hydraulic Unload Car
2.9 Electrical Control System
3. Machine Photo
5. Installation of the Machine
The machine parts are installed according to the layout and
prepared for the commissioning.
The installation comprises of:
- Installation by Suhang service technicians.
- The following services are included:
- Installation of the machine components.
- Adjustment of the machine components.
- Connection of all motors to the control cabinet.
- Installation of the required safety devices.
Delivery extent does not comprise of:
- Media supply (electrics, compressed air, etc.)to the
- Raw material process material and fuels
- Raw material for test blocks
- Transport and lifting devices
- Auxiliary staff.
The workers of the plant should be present during the installation
in order to become familiar with the new machines.
6. After-Sales Service Commitments
Suhang hereby solemnly promises: We implement the “three
guarantees” service policy for any equipments sold by Suhang,
provide free of charge installation guidelines, commissioning and
maintenance of the equipments, training of the Buyer’s relevant
Operators; and provide technical requirements for the installation
and operation of the equipments, technical layout diagrams and
other related information, provide a lifetime supply of maintenance
and spare parts
The detailed measures are as follows:
1.Guidelines for installation and commissioning of equipments:
Based on the actual situation, to assist and guide the Buyer and
Buyer’s technical personnel in the overall installation location,
the installation of equipments, and provide Buyer with answers to
their questions and related issues;
2.Provide training for operation and maintenance personnel:
Based on the Buyer’s request, Suhang will provide free of charge
training of the operation and maintenance personnel;
a) The User (Buyer) can send their operation and maintenance
personnel to our factory for learning and training;
b) When Suhang is doing the installation and test running of the
equipments for the Buyer, the Buyer can send their personnel to
3.If failure occurs in any of the machines during the “three
guarantees” period(one year), then, upon the Buyer’s request,
Suhang will eliminate the failure;